超聲波液位計通常應用于溫度在-40℃～100℃之間、壓力在3Bar(5kg/cm2)以下的場所進行液位或料位的測量。
The ultrasonic liquid level meter is usually used to measure the liquid level or material level in the place where the temperature is between - 40 ℃ and 100 ℃ and the pressure is below 3bar (5kg / cm2).
超聲波液位計的安裝
Installation of ultrasonic level gauge
1超聲波液位計安裝方式
1. Installation mode of ultrasonic level gauge
1）超聲波液位計應水平置于容器頂部。
1) The ultrasonic level gauge shall be placed horizontally on the top of the vessel.
2）選擇一個合適的方法來安裝超聲波液位計。
2) Choose a suitable method to install the ultrasonic level gauge.
3）超聲波收發傳感面應與液面平行。
3) The ultrasonic transmitting and receiving sensing surface should be parallel to the liquid level.
4）超聲波收發傳感面應盡量避免靠近容器側壁。
4) Ultrasonic transmitting and receiving sensing surface should be avoided to be close to the side wall of the vessel.
5）為避免振動或搖晃導致液位計松動，請小心的進行堅固安裝。
5) In order to avoid loosening of the level gauge due to vibration or shaking, please install it firmly with care.
6）同一容器內不要安裝多臺超聲波液位計，超聲波互相干擾會導致測量誤差。
6) Do not install more than one ultrasonic level gauge in the same container, ultrasonic interference will lead to measurement error.
7）安裝位置應避免陽光直射，露天安裝應加防護罩。
7) The installation position should be away from direct sunlight, and the outdoor installation should be equipped with protective cover.